7 October 2026
What causes telematics gaps in a rental fleet

Every fleet ops manager has a number in their head for how much of the fleet reports. For a lot of yards that number isn't 100%, and it isn't close. The gap doesn't come from one cause. It comes from a handful of ordinary decisions made over years, none of which looked like a problem at the time.
Where the gaps start
The biggest chunk is usually the equipment that was never ordered with a device. Telematics has been standard on new compact track loaders and skid steers for a while, but plenty of the fleet wasn't bought new, or wasn't bought with the option checked. Trailers, light towers, air compressors, generators, and most attachments simply don't come with a modem at all. If a third of your fleet by unit count is "powered equipment with no engine ECU to tap into," that's a third you'll never see on a dashboard no matter what platform you run.
Acquired fleets are the second cause, and the one nobody budgets for. Buy a regional competitor, pick up a used lot at auction, or absorb a dealer's rental return units, and you inherit whatever telematics (or lack of it) came with them. Half the time the hardware is there but it's a different OEM's system that doesn't feed your dashboard. The units show up in your yard count on day one and in your utilisation report never.
Then there's attrition on units that did report once. SIM contracts lapse and nobody catches it for a renewal cycle. A battery drains on equipment that sits for six weeks and the modem goes dark with it. A branch tech pulls a device during a repair and it doesn't go back on. None of this is sabotage, it's just the kind of thing that falls off a punch list when the yard is short-staffed. Cellular dead zones do the rest: a lot of job sites and remote yards sit in coverage holes where a perfectly good device has nothing to talk to.
Why the gap matters more than the percentage suggests
A telematics gap doesn't spread evenly across the fleet. It concentrates in exactly the categories hardest to track by other means: older units, attachments, anything sitting at a satellite yard instead of the main branch. Those are also the units most likely to be quietly idle for a full redeployment cycle, because nobody's driving past them and nobody's getting an engine-hours ping to flag it.
The units without telematics carry a disproportionate share of the undetected idle time on the utilisation report. A branch manager doing a windshield survey once a month catches the obvious cases, a unit with grass growing up through the tracks. What that survey misses is the unit that moved three weeks ago and hasn't moved since, sitting in a yard with forty other machines that all look the same from the gate.
Closing the gap without re-fleeting
Retrofitting every trailer and compressor with a tracker is a real option, and some fleets do it. It's also slow, it's another SIM bill per unit, and it still doesn't solve for coverage dead zones or the next acquisition that shows up with mismatched hardware. For fleets that can't wait on a hardware rollout to answer "is this thing working," checking the ground instead of the asset answers it faster. Asset Utilisation Monitor compares satellite passes of the same yard week over week and flags which units moved or show fresh disturbance around them and which have sat untouched, no telematics required.
If non-reporting units are the hole in your utilisation picture, it's worth seeing what a weekly idle-versus-active map of your yards looks like.