13 October 2026

Dead stock vs active stock in a rental fleet: how to tell them apart

A rusted grader sitting unused in tall grass and brush, overtaken by vegetation.

Every branch manager knows the feeling. You pull the utilization report, two units at the back corner of the yard show up as "available," and nobody can remember the last time they went out on a ticket. That's the gap between what the system says and what's actually sitting there. Dead stock is equipment that isn't earning, whether it's broken down, waiting on a part, stuck behind other units, or just forgotten after the last job wrapped. Active stock is everything moving through the counter: units going out, coming back, getting PM'd, and going back out again.

The trouble is that most fleets can't tell the two apart with confidence unless every unit has working telematics reporting back cleanly, and a lot of yards don't have that. Older skid steers, trailers, light towers, and compact equipment bought secondhand rarely came with a modem. Even units that do have it sometimes stop reporting when a battery dies or a SIM lapses, and nobody notices for months.

What counts as dead stock in a rental fleet

Normal turnaround looks like a unit sitting idle for a day or two between rentals while it waits for its next ticket. Dead stock is the unit that's been parked for weeks with no hour meter movement, no dispatch record, and no PM scheduled because it's not in rotation at all. It's the trailer that got bumped to the back row during a yard reshuffle and never made it back into the active lineup. It's the compactor that came back from a job with a hydraulic issue, got flagged for repair, and is still waiting six weeks later because the work order fell off someone's list.

None of that shows up cleanly in a utilization report if the unit isn't reporting hours or location. The asset still has a record in your system. It still has a depreciation schedule. But it's not contributing anything, and it's taking up a spot that could hold a unit that turns.

Spotting dead stock in a yard without walking every row

The old method is the windshield survey: someone drives the lot with a clipboard or a tablet, matches serial numbers to the yard map, and notes what's moved since the last pass. It works, but it's slow, it's easy to miss a unit tucked behind a stack of pipe or parked at an angle nobody expects, and it only reflects one moment in time. A unit that looked parked on Tuesday could have gone out Wednesday morning, and the survey won't know that until the next walk.

The faster tell is ground disturbance. An active unit leaves tracks. Tire ruts change, gravel gets displaced, the ground around it looks different from one week to the next because something moved it, loaded it, or worked around it. A dead unit sits in the same footprint, same position, same undisturbed patch of yard, pass after pass.

That pattern holds whether the unit is a telematics-equipped excavator or a bare trailer with no electronics at all, which is the real advantage over relying on reported hours. You don't need the machine to tell you it hasn't moved. The yard tells you.

Why this matters for redeploy decisions

Dead stock sitting in a yard ties up insurance, depreciation, and physical space while a branch down the road rents in a similar unit because the fleet doesn't know this one is available. Catching dead stock early, before it's been sitting for three months instead of three weeks, is the difference between a quick redeploy call and a write-down conversation at year end.

Asset Utilisation Monitor builds that comparison automatically, flagging which units have moved and which haven't by checking position and ground disturbance between passes over the same yards, so you get a weekly read on idle versus active stock without a crew walking every row or waiting on a telematics unit that might not be there.

If dead stock has been quietly piling up at one of your yards, it's worth seeing which units show up idle on the next pass.

Join the pilot list

← Back to the blog